Exergy 2017-2027 L5P CP3 Conversion Kit

Sportsman CP3 Conversion: Are you losing rail pressure from your original worn out Denso HP4 pump? Are you looking for a pump with a proven long haul track record?  From stock up to 650+HP our Sportsman L5P CP3 pumps are the best and most affordable solution for an upgraded pump that won't require significant supporting modifications or tuning.

Exergy Sportsman pumps have higher flowing valves that last longer than stock making them a great replacement option. They also continue to increase flow with RPM beyond 3,000 RPM. Stock pumps typically stop increasing flow when RPM exceeds approximately 3,000 RPM.

10mm CP3 Conversion: Has your factory pump hit its limit, and you still need more pump capacity? Do you want the capability of more power without the worry of a multi-pump controller failing, a custom length belt breaking or a second pump to worry about? For applications up to 800+HP our 10mm Stroker L5P CP3 pumps are the best option to take your build to the next level while incorporating all the increased reliability features of our Sportsman pump 

12mm CP3 Conversion: Looking for a single CP3 pump that will support up 1000+HP and drive like stock on your L5P? Do you want the capability of more power without the worry of a pump controller failing, a custom belt breaking, mount cracking, or even a second pump to worry about? Keep your engine bay looking clean with a single stroker pump. Our 12mm Stroker L5P CP3 pumps are the best option to take your build past the 1000HP mark.

14mm CP3 Conversion: Looking for a single CP3 pump that will support up 1000+HP and drive like stock on your L5P? Do you want the capability of more power without the worry of a pump controller failing, a custom belt breaking, mount cracking, or even a second pump to worry about? Keep your engine bay looking clean with a single stroker pump. Our 12mm Stroker L5P CP3 pumps are the best option to take your build past the 1000HP mark.

550 Alpha CP3 Conversion: Introducing the Exergy 550 Alpha CP3! The first of an industry leading series of pumps set to take the CP3 pump platform to the next level! Based on our legendary 14mm Stroker pumps, the 550 Alpha CP3 carries the output trajectory 1000 RPM farther than previous and competing CP3 Stroker pumps, peaking at an output of 550 liters per hour. This makes it the perfect pump for high RPM race applications that spin beyond 4500 RPM.

Note: The 550 Alpha pumps will require a different supply line. The original supply port is plugged.  This plug should never be removed. The fuel supply is fed directly into the billet gear pump housing at the port labeled "Inlet". The 550 Alpha pumps have a proprietary MPROP/fuel pressure regulator design for optimum rail pressure control without impeding max pump performance. Custom tuning and supporting modifications will be required. Primary fuel supply requirement for max pump performance: 200 GPH @ 15 psi per Pump.

Let Exergy give you peace of mind with your fuel system purchase!

Note: Though a lift pump is not required, to achieve maximum pump performance a fuel supply of 150 GPH @ 15 psi per pump is recommended.